DollaTek 35A 36V BMS Board with Balance and Heat Output for Lithium-Ion Li-ion 18650 Li-ion Battery Cell

Availability: 0
ID: 662619
Product Code: ANEB083Q389T3T

44.39€
(Ex Tax: 36.69€)

Delivery by

DPD delivery Omniva delivery Smartpost delivery FedEx delivery Venipak delivery 

Payment options

Pay with Swedbank Pay with Apple Pay Pay with Google Pay Pay with Visa Pay with Mastercard 


Description
The protective board is suitable for 10-cell lithium-ion batteries, such as Ternary batteries, manganese batteries and cobalt acid batteries The charging and discharging interfaces are the same. With balanced heatsink and 10 MOS MOS MOSFET with low internal resistance. The continuous discharge current is 35A. The current discharge current is 100A. It has a balance function that ensures that each battery unit is fully charged at the same time The wiring is neat, avoiding right angle lines and curvature of the edges. Reduce vias to avoid signal distortion and cross interference. The wiring markings are clear and easy to understand to avoid incorrect connections Before installing the protective board, the batteries must be well matched. The higher the battery strength, the longer the mileage and the better the performance of the protection board. The battery should be connected in parallel and then in series. › See more product details; Product description Specifications: Continuous discharge current: 35 A. Current discharge current: 100A. Charging voltage: 42 V. Charging current: 8A (max.) Overcharge detection voltage: 4.28±0.05V Overload protection delay: 100ms Overload termination voltage: 4.08±0.05V Equilibrium detection voltage: 4.2±0.025V Balance cancel voltage: 4.2 ± 0.05 V. Balance current: 56±5mA Overcharge detection voltage: 2.55±0.08V Overexcitation detection delay: 50ms Over-discharge switch-off voltage: 3.0±0.1 Overcurrent detection voltage: 150 mV. Overcurrent detection delay: 15ms Overcurrent protection current: 120 ± 5 A. Protection termination condition: disconnect load Short circuit protection condition: external load short circuit Short circuit detection delay: 200uS Protection termination condition: disconnect load Internal resistance of the main circuit: ≤15 mΩ. Working current: ≤50uA. Quiescent current (battery overcharged): ≤10uA. Operating temperature: -30 °C to +80 °C. Size: 69 x 51.5 x 10 mm / 2.71 x 2.02 x 0.39 inches. Package includes: 1 x battery protection board; Product description Specifications: Continuous discharge current: 35 A. Current discharge current: 100A. Charging voltage: 42 V. Charging current: 8A (max.) Overcharge detection voltage: 4.28±0.05V Overload protection delay: 100ms Overload termination voltage: 4.08±0.05V Equilibrium detection voltage: 4.2±0.025V Balance cancel voltage: 4.2 ± 0.05 V. Balance current: 56±5mA Overcharge detection voltage: 2.55±0.08V Overexcitation detection delay: 50ms Over-discharge switch-off voltage: 3.0±0.1 Overcurrent detection voltage: 150 mV. Overcurrent detection delay: 15ms Overcurrent protection current: 120 ± 5 A. Protection termination condition: disconnect load Short circuit protection condition: external load short circuit Short circuit detection delay: 200uS Protection termination condition: disconnect load Internal resistance of the main circuit: ≤15 mΩ. Working current: ≤50uA. Quiescent current (battery overcharged): ≤10uA. Operating temperature: -30 °C to +80 °C. Size: 69 x 51.5 x 10 mm / 2.71 x 2.02 x 0.39 inches. Package includes: 1 x battery protection board; Specifications: Continuous discharge current: 35 A. Current discharge current: 100A. Charging voltage: 42 V. Charging current: 8A (max.) Overcharge detection voltage: 4.28±0.05V Overload protection delay: 100ms Overload termination voltage: 4.08±0.05V Equilibrium detection voltage: 4.2±0.025V Balance cancel voltage: 4.2 ± 0.05 V. Balance current: 56±5mA Overcharge detection voltage: 2.55±0.08V Overexcitation detection delay: 50ms Over-discharge switch-off voltage: 3.0±0.1 Overcurrent detection voltage: 150 mV. Overcurrent detection delay: 15ms Overcurrent protection current: 120 ± 5 A. Protection termination condition: disconnect load Short circuit protection condition: external load short circuit Short circuit detection delay: 200uS Protection termination condition: disconnect load Internal resistance of the main circuit: ≤15 mΩ. Working current: ≤50uA. Quiescent current (battery overcharged): ≤10uA. Operating temperature: -30 °C to +80 °C. Size: 69 x 51.5 x 10 mm / 2.71 x 2.02 x 0.39 inches. Package includes: 1 x battery protection board
The color of the product shown on the display may differ from the actual one. The product description is general and may not necessarily reflect all specific technical features of the product. Prices in the online store may differ from prices in physical stores and service centers. Warehouse stock in the store and in the online shop may vary, therefore in certain cases the delivery time may differ from the one indicated at the moment of order and/or the order may not be fulfilled in full (in such a case, the customer will be informed in advance). 

Product compliance check: if the order is placed for a legally regulated product (e.g., a restricted or licensed item), JusuPrekes.lt reserves the right to decline the order after assessing its legal compliance.

Spotted a mistake? Report it to us

ESTO leasing Jusuprekes.lt – simple and fast buy now, pay later option