Analyzer MF/HF/VHF UHF Input for 0.1MHz-350MHz and UHF Input for 240MHz - 960MHz Signal Generator - Measure, Test

Availability: 0
ID: 520166
Product Code: ANEB0DWN2SVDFT

179.61€
(Ex Tax: 148.44€)

Delivery by

DPD delivery Omniva delivery Smartpost delivery FedEx delivery Venipak delivery 

Payment options

Pay with Swedbank Pay with Apple Pay Pay with Google Pay Pay with Visa Pay with Mastercard 


Description
* Linear power supply to avoid switching noise. *Add port ESD protection to upgrade version (V0.3.1_E) The input/output specification of the tinySA is divided into the 4 modes Specifications for low input mode: * Input frequency range from 100 kHz to 350 MHz * Input impedance 50 ohms when input attenuation is set to 10dB or more. Welcome and I wish you a happy life, my friend. › See more product details; Product description SpecificationUser Interface: * Screen resolution: 320 x 240 pixels. * Screen diagonal 2.8 inches. * 16 bits per RGB pixel * Resistive touch control. * Jog switch control. * Serial USB interface control * Optional TTL USART port (SW not yet implemented) on the internal board * Selectable manual and automatic input attenuation between 0dB and 31dB in 1dB increments * Absolute maximum input level without attenuation of +10 dBm * Absolute maximum input power with 30 dB attenuation of +20 dBm for a short time. * Input interface point of third order modulation products (IIP3) with a 0 dB attenuation of +15 dBm * 1 dB compression point at +2 dBm with 0 dB attenuation * Resolution of the power detector of 0.5 dB and linearity frequency of +/-1 dB. * Absolute power level accuracy after power level calibration of +/- 1 dB * Lowest detectable signal at a resolution bandwidth of 30 kHz of -102 dBm * Frequency accuracy equal to the selected resolution bandwidth. * Phase noise of -90 dB/Hz at 100 kHz offset and -115 dB/Hz at 1 MHz offset * Track-free dynamic range when using a 30 kHz resolution bandwidth of 70 dB * Manually selectable resolution filters of 3, 10, 30, 100, 300, 600 kHz. Automatic selection of one of the 57 resolution filters. * Screen resolution of 145 or 290 points of measurement. * Scan speed of over 1000 points/second when using the largest resolution filters. * Automatically optimize actual scan points to ensure coverage of the entire scan area regardless of the resolution bandwidth selected. Package includes: 1 x 2.8 inch analyser. 20 cm SMA-SMA RG174 cable x 2. 1 x USB Type-C data cable. 1 x hand rope. 1 x SMA female to female. 1 x SMA telescopic antenna; Product description SpecificationUser Interface: * Screen resolution: 320 x 240 pixels. * Screen diagonal 2.8 inches. * 16 bits per RGB pixel * Resistive touch control. * Jog switch control. * Serial USB interface control * Optional TTL USART port (SW not yet implemented) on the internal board * Selectable manual and automatic input attenuation between 0dB and 31dB in 1dB increments * Absolute maximum input level without attenuation of +10 dBm * Absolute maximum input power with 30 dB attenuation of +20 dBm for a short time. * Input interface point of third order modulation products (IIP3) with a 0 dB attenuation of +15 dBm * 1 dB compression point at +2 dBm with 0 dB attenuation * Resolution of the power detector of 0.5 dB and linearity frequency of +/-1 dB. * Absolute power level accuracy after power level calibration of +/- 1 dB * Lowest detectable signal at a resolution bandwidth of 30 kHz of -102 dBm * Frequency accuracy equal to the selected resolution bandwidth. * Phase noise of -90 dB/Hz at 100 kHz offset and -115 dB/Hz at 1 MHz offset * Track-free dynamic range when using a 30 kHz resolution bandwidth of 70 dB * Manually selectable resolution filters of 3, 10, 30, 100, 300, 600 kHz. Automatic selection of one of the 57 resolution filters. * Screen resolution of 145 or 290 points of measurement. * Scan speed of over 1000 points/second when using the largest resolution filters. * Automatically optimize actual scan points to ensure coverage of the entire scan area regardless of the resolution bandwidth selected. Package includes: 1 x 2.8 inch analyser. 20 cm SMA-SMA RG174 cable x 2. 1 x USB Type-C data cable. 1 x hand rope. 1 x SMA female to female. 1 x SMA telescopic antenna; SpecificationUser Interface: * Screen resolution: 320 x 240 pixels. * Screen diagonal 2.8 inches. * 16 bits per RGB pixel * Resistive touch control. * Jog switch control. * Serial USB interface control * Optional TTL USART port (SW not yet implemented) on the internal board * Selectable manual and automatic input attenuation between 0dB and 31dB in 1dB increments * Absolute maximum input level without attenuation of +10 dBm * Absolute maximum input power with 30 dB attenuation of +20 dBm for a short time. * Input interface point of third order modulation products (IIP3) with a 0 dB attenuation of +15 dBm * 1 dB compression point at +2 dBm with 0 dB attenuation * Resolution of the power detector of 0.5 dB and linearity frequency of +/-1 dB. * Absolute power level accuracy after power level calibration of +/- 1 dB * Lowest detectable signal at a resolution bandwidth of 30 kHz of -102 dBm * Frequency accuracy equal to the selected resolution bandwidth. * Phase noise of -90 dB/Hz at 100 kHz offset and -115 dB/Hz at 1 MHz offset * Track-free dynamic range when using a 30 kHz resolution bandwidth of 70 dB * Manually selectable resolution filters of 3, 10, 30, 100, 300, 600 kHz. Automatic selection of one of the 57 resolution filters. * Screen resolution of 145 or 290 points of measurement. * Scan speed of over 1000 points/second when using the largest resolution filters. * Automatically optimize actual scan points to ensure coverage of the entire scan area regardless of the resolution bandwidth selected. Package includes: 1 x 2.8 inch analyser. 20 cm SMA-SMA RG174 cable x 2. 1 x USB Type-C data cable. 1 x hand rope. 1 x SMA female to female. 1 x SMA telescopic antenna
The color of the product shown on the display may differ from the actual one. The product description is general and may not necessarily reflect all specific technical features of the product. Prices in the online store may differ from prices in physical stores and service centers. Warehouse stock in the store and in the online shop may vary, therefore in certain cases the delivery time may differ from the one indicated at the moment of order and/or the order may not be fulfilled in full (in such a case, the customer will be informed in advance). 

Product compliance check: if the order is placed for a legally regulated product (e.g., a restricted or licensed item), JusuPrekes.lt reserves the right to decline the order after assessing its legal compliance.

Spotted a mistake? Report it to us

ESTO leasing Jusuprekes.lt – simple and fast buy now, pay later option