MAGT Electric Skateboard ESC Kit, 430 W 36 V Double Drive Electric Longboard Replacement Control Motherboard Brushless Motor with Remote Control for DIY Skateboard

Availability: 5
ID: 459920
Model ANEB08929SHDDT

146.09€
(Ex Tax: 120.74€)

Delivery by

Delivery

DPD deliveryOmniva deliverySmartpost deliveryFedEx deliveryVenipak delivery

Payment

Pay with SwedbankPay with Apple PayPay with Google PayPay with VisaPay with Mastercard


Description
High quality: this electric skateboard ESC kit consists of high-quality chips and electronic components. The dual drive design provides excellent and stable performance. Supports the remote control: the solid structure of the motherboard can significantly extend the service life. With remote receiver module, it supports remote control. The well-organised circuit board is easy to install, but requires professional knowledge. Excellent performance: this electric longboard control system has an EMP control module with remote control module. It can do anything ESC does. ESC would be easy to damage. This control module would be more stable and cheaper. Ergonomic design: comes with a portable controller, has an ergonomic shape and is very comfortable to hold and use. 4 different speed modes: high speed sports mode, high speed saving mode, medium speed mode, low speed mode. Easy to use: electric skateboard esc kit with an LED indicator that shows the signal status, speed modes and battery percentage. › See more product details; Product description Technical data: Double drive: 100 x 76 x 18 mm. Voltage: 36V Current: 12 A. Maximum speed: 3000 rpm. Maximum power: 430W (36V) Drive mode: sine FOC has a slow start Maximum speed: 35 km/h. Protection: Over voltage, undervoltage, over temperature, standstill, CWCCW, speed control. Detection method: hall Load weight: ≤ 120 kg. Power connection: XT60. Motor plug: 4 mm banana plug. Hall interface: 5 pin 2.0 connector Size: approx. 18.5 x 10 x 4 cm / 7.28 x 3.94 x 1.57 inches. Approximate weight 227 g. Package list: 1 x control. 1 x remote control transmitter. 1 x LED battery indicator. 1 x switch. 1 x USB cable. Note: No installation instructions are included. Professional use is highly recommended. The remote control assigns a signal description to the main control: 1: Connect the main controller to the power supply. On 2: The device will turn on, wait two seconds and then hold the button for about 6 seconds. Wait until the switch indicator flashes. 3: Turn on the remote control switch and use a small screwdriver to press the button in the small hole in the lower left corner of the remote control. 4: The remote control will turn off for two seconds and then turn on. Wait until the signal light of the remote control and the signal light of the switch flash at the same time to indicate that the match is successful.; Product description Technical data: Double drive: 100 x 76 x 18 mm. Voltage: 36V Current: 12 A. Maximum speed: 3000 rpm. Maximum power: 430W (36V) Drive mode: sine FOC has a slow start Maximum speed: 35 km/h. Protection: Over voltage, undervoltage, over temperature, standstill, CWCCW, speed control. Detection method: hall Load weight: ≤ 120 kg. Power connection: XT60. Motor plug: 4 mm banana plug. Hall interface: 5 pin 2.0 connector Size: approx. 18.5 x 10 x 4 cm / 7.28 x 3.94 x 1.57 inches. Approximate weight 227 g. Package list: 1 x control. 1 x remote control transmitter. 1 x LED battery indicator. 1 x switch. 1 x USB cable. Note: No installation instructions are included. Professional use is highly recommended. The remote control assigns a signal description to the main control: 1: Connect the main controller to the power supply. On 2: The device will turn on, wait two seconds and then hold the button for about 6 seconds. Wait until the switch indicator flashes. 3: Turn on the remote control switch and use a small screwdriver to press the button in the small hole in the lower left corner of the remote control. 4: The remote control will turn off for two seconds and then turn on. Wait until the signal light of the remote control and the signal light of the switch flash at the same time to indicate that the match is successful.; Technical data: Double drive: 100 x 76 x 18 mm. Voltage: 36V Current: 12 A. Maximum speed: 3000 rpm. Maximum power: 430W (36V) Drive mode: sine FOC has a slow start Maximum speed: 35 km/h. Protection: Over voltage, undervoltage, over temperature, standstill, CWCCW, speed control. Detection method: hall Load weight: ≤ 120 kg. Power connection: XT60. Motor plug: 4 mm banana plug. Hall interface: 5 pin 2.0 connector Size: approx. 18.5 x 10 x 4 cm / 7.28 x 3.94 x 1.57 inches. Approximate weight 227 g. Package list: 1 x control. 1 x remote control transmitter. 1 x LED battery indicator. 1 x switch. 1 x USB cable. Note: No installation instructions are included. Professional use is highly recommended. The remote control assigns a signal description to the main control: 1: Connect the main controller to the power supply. On 2: The device will turn on, wait two seconds and then hold the button for about 6 seconds. Wait until the switch indicator flashes. 3: Turn on the remote control switch and use a small screwdriver to press the button in the small hole in the lower left corner of the remote control. 4: The remote control will turn off for two seconds and then turn on. Wait until the signal light of the remote control and the signal light of the switch flash at the same time to indicate that the match is successful.
The color of the product shown on the display may differ from the actual one. The product description is general and may not necessarily reflect all specific technical features of the product. Prices in the online store may differ from prices in physical stores and service centers. Warehouse stock in the store and in the online shop may vary, therefore in certain cases the delivery time may differ from the one indicated at the moment of order and/or the order may not be fulfilled in full (in such a case, the customer will be informed in advance). 

Product compliance check: if the order is placed for a legally regulated product (e.g., a restricted or licensed item), JusuPrekes.lt reserves the right to decline the order after assessing its legal compliance.

Spotted a mistake? Report it to us

ESTO leasing Jusuprekes.lt – simple and fast buy now, pay later option

The color of the product shown on the display may differ from the actual one. The product description is general and may not necessarily reflect all specific technical features of the product. Prices in the online store may differ from prices in physical stores and service centers. Warehouse stock in the store and in the online shop may vary, therefore in certain cases the delivery time may differ from the one indicated at the moment of order and/or the order may not be fulfilled in full (in such a case, the customer will be informed in advance). 

Product compliance check: if the order is placed for a legally regulated product (e.g., a restricted or licensed item), JusuPrekes.lt reserves the right to decline the order after assessing its legal compliance.

Spotted a mistake? Report it to us

ESTO leasing Jusuprekes.lt – simple and fast buy now, pay later option