14-day right of withdrawal Warranty

OP AMP Test Module Operational Amplifier Test Board Amplification Circuit Test for Single Double Quad DC12V T2 Tester

Availability: 5
ID: 839852
Product Code: ANEB0DM4TCB7MT

40.08€
(Ex Tax: 33.13€)

Delivery by

Delivery

DPD deliveryOmniva deliverySmartpost deliveryFedEx deliveryVenipak delivery

Payment

Pay with SwedbankPay with Apple PayPay with Google PayPay with VisaPay with Mastercard


Description
【Stable Test Module】This Oamp tester accurately detects single opamp, double opamp and quad oamp chips. It evaluates the amplification capabilities and chip conversion rates, distinguishing low speed chips from high-speed fraudsters Static current testing: includes a test terminal for static current measurement under a power supply of ±5V. Helps to understand the characteristics of operational amplifiers and distinguish models to ensure accurate and effective test results Low Speed Detection: Detects low speed operators from incomplete output waveforms. The LEDs indicate abnormal operation and only work with low frequency signals. Green LEDs flash synchronously, which promotes accurate detection STURDY DESIGN Made with sturdy PCB material for excellent maintainability and interchangeability. Confidence in quality construction for precise and stable operation tests HIGH SPEED OUTPUT For fast op amps, it delivers consistent performance with high and low frequency signals. The and green LEDs sync at 200 kHz or flash brightly at 10 Hz, which ensures stable signal output › See more product details; Product description Specification: Item Type: Operational Amplifier Test Board Size: approx. 9.5x5.8cm/3.74x2.28inch Power requirements: Voltage: DC12V, Current: 100 mA Application: For Single OP AMP Models: LM741, LF356, NE5534, TL071, TL081, 0P07 and other standard single OP AMP packages For dual OP AMP models: LM358, NE5532, TL072, TL082, MC1458, RC4558, 0P275, AD827 and other standard dual OP AMP packages For Quad OP AMP models: LM324, TL074, TL084, LF347, AD713. How to use: Direct installation and use Packing list: 1 x test board. Note: Test instructions: 1. Test only one chip at a time. Use one of the three test ports. 2. Use the DC voltage meter of the digital multimeter to test the static current. Test the voltage above 10 ohms, 1=V/10(ma). For example, V=15MV, static current 1=1.5ma. (Do not press the switch on the right side of the chart at this time). 3. The test end can be connected to an oscilloscope or frequency counter. Adjust the potentiometer to change the test frequency.; Product description Specification: Item Type: Operational Amplifier Test Board Size: approx. 9.5x5.8cm/3.74x2.28inch Power requirements: Voltage: DC12V, Current: 100 mA Application: For Single OP AMP Models: LM741, LF356, NE5534, TL071, TL081, 0P07 and other standard single OP AMP packages For dual OP AMP models: LM358, NE5532, TL072, TL082, MC1458, RC4558, 0P275, AD827 and other standard dual OP AMP packages For Quad OP AMP models: LM324, TL074, TL084, LF347, AD713. How to use: Direct installation and use Packing list: 1 x test board. Note: Test instructions: 1. Test only one chip at a time. Use one of the three test ports. 2. Use the DC voltage meter of the digital multimeter to test the static current. Test the voltage above 10 ohms, 1=V/10(ma). For example, V=15MV, static current 1=1.5ma. (Do not press the switch on the right side of the chart at this time). 3. The test end can be connected to an oscilloscope or frequency counter. Adjust the potentiometer to change the test frequency.; Specification: Item Type: Operational Amplifier Test Board Size: approx. 9.5x5.8cm/3.74x2.28inch Power requirements: Voltage: DC12V, Current: 100 mA Application: For Single OP AMP Models: LM741, LF356, NE5534, TL071, TL081, 0P07 and other standard single OP AMP packages For dual OP AMP models: LM358, NE5532, TL072, TL082, MC1458, RC4558, 0P275, AD827 and other standard dual OP AMP packages For Quad OP AMP models: LM324, TL074, TL084, LF347, AD713. How to use: Direct installation and use Packing list: 1 x test board. Note: Test instructions: 1. Test only one chip at a time. Use one of the three test ports. 2. Use the DC voltage meter of the digital multimeter to test the static current. Test the voltage above 10 ohms, 1=V/10(ma). For example, V=15MV, static current 1=1.5ma. (Do not press the switch on the right side of the chart at this time). 3. The test end can be connected to an oscilloscope or frequency counter. Adjust the potentiometer to change the test frequency.
The color of the product shown on the display may differ from the actual one. The product description is general and may not necessarily reflect all specific technical features of the product. Prices in the online store may differ from prices in physical stores and service centers. Warehouse stock in the store and in the online shop may vary, therefore in certain cases the delivery time may differ from the one indicated at the moment of order and/or the order may not be fulfilled in full (in such a case, the customer will be informed in advance). 

Product compliance check: if the order is placed for a legally regulated product (e.g., a restricted or licensed item), JusuPrekes.lt reserves the right to decline the order after assessing its legal compliance.

Spotted a mistake? Report it to us

ESTO leasing Jusuprekes.lt – simple and fast buy now, pay later option